7 Easy Tips For Closing Your Pool This Fall

In Ground Pool Closed Tips

Closing Your Pool

With summer gone, it’s time for above ground pool owners to close down their pools. Winter brings frigid temperatures and ice can cause thousands of dollars of damage to pools that aren’t prepared correctly. That makes properly closing down your pool an essential part of pool maintenance. Here are our key steps to prepare you for closing your pool.

In-Ground Pools

The first task in prepping your pool for its winter nap is to make sure the water chemistry is correctly balanced to last through the winter without corroding or forming scale on the sides of your pool. This will also keep the thousands of gallons you have in your pool clean and ready to use next summer.

Next, cycle the water through the pump and filter for a few days until chlorine levels to return to normal. Then add winter algaecide.

On closing day, clean the pool one last time. Be sure to use a brush on the walls and the bottom to clear any leftover algae or silt. Drain water from the pump, filtering, and heating systems.

It’s a general practice to drain the pool below the mouth of the skimmer inlet. The idea is to keep water out of the filter and pumping system. While this sounds convenient, freezing may be an issue if you have tile at the waterline.

Above-Ground Pools

You’ll need to remove and store pumps and filters. Insert plugs into the pool filter water intake and outflow openings (usually in the pool’s sidewall). Disconnect all hoses from the pool and let it drain. Disconnect and drain all water heaters, filters, skimmers, automatic chlorinator, or salt chlorinator, and then store these in a warm, dry place like your basement.

Lastly, inflate and deploy the pool pillows and cover the pool. Be sure the cover is secure so that it won’t blow away and that there is enough support from the pillow underneath so that ice meltwater will drain easily from the cover. Otherwise, ice and meltwater can stretch and tear the cover and contaminate your pool water.

Closing down your pool may sound like daunting maintenance job, but it’s something that can be finished in the span of a week but a mistake could cost you thousands.

There’s a lot more to it than just slapping a cover on and calling it a day.

Let’s take a look at what you need to do to get your swimmin’ hole ready for its long winter’s rest.

1. Get the timing right

Closing your pool too early can encourage algae growth and make your job a whole lot harder when it’s time to reopen the following spring.

Make your life easier and enjoy your pool longer by waiting until late summer.

If your pool is heated, you can get away with waiting until October.

A good rule of thumb is to wait until the water is consistently lower than 65 degrees before closing.

Begin the process about a week before you actually want the pool to be closed.

2. Clean it up

Brush the sides and bottom of your pool and then vacuum it. A thorough cleaning before closing for the season will help to prevent algae growth and lighten your workload when it’s time to open it back up.

3. Test the waters

It’s best to take a sample of your pool’s water to a reputable pool store to have it tested.

You’ll want the pH to be between 7.4 and 7.6 and the alkalinity to be between 100 and 150 ppm.

Shoot for the top of these ranges when you’re closing your pool for the winter.

4. Add the chemicals

The winterizing chemicals you’ll add to your pool are:

  • A pH increaser and/or an alkalinity increaser.
  • Sanitizer, such as Chlorine or Bromine.
  • Chlorine shock.
  • Winter algaecide.

Keep in mind that the chlorine shock will destroy the algaecide.

The best course of action is to add the shock five to seven days before closing your pool, and then waiting to add the algaecide until right before you put the cover on.

5. What about the filter and pump?

Remove the drain plugs and allow the pump to drain. Remove the pump and all the hoses that are attached. If you have a chlorinator, that should be removed at this time as well.

If you keep all the drain plugs in the pump basket, you’ll know right where they are and you won’t risk them getting misplaced.

The hoses, pump, and chlorinator will last longer if you store them inside during the cold winter months.

No matter what type of filter you have, it will need to be removed and cleaned before storage. Filters should also be stored inside, with the exception of a sand filter, which may be too large and/or heavy to take indoors.

6. To drain or not to drain?

There is some debate about the validity of lowering the water level for the winter. This issue revolves around protecting the skimmer from cracking due to freezing temps.

For an above ground pool, removing the hose from the skimmer and using a winter skimmer cover plate will remove the need to drain the pool at all. The normal level will actually be better.

An inground pool is a bit different. Your best bet is to hire a professional to come and blow out the pipes. They can insert a rubber piece that will protect the skimmer from damage in the freezing cold. If this is done, you won’t need to drain the pool.

If you have tile on the sides of your pool, you should lower the water level to about 4 inches beneath the tile. This will prevent it from possible damage.

At this point in the process, it’s also the best time to remove ladders and any other accessories that can be stored.

7. Cover it up

An above-ground pool will need an air pillow beneath the cover.

You can use clips and cables to secure your cover.

An in-ground pool doesn’t require an air pillow but should use clips to secure the cover.

The long wait for spring

You’ve cleaned and scrubbed, added chemicals and covered up your pool.

Following these maintenance tips gives you the best chance of not having any unwelcome surprises come spring. Have any questions about closing your pool? Contact us here. 

How To Protect Your Patio Furniture

protect your patio furniture

How To Protect Your Patio Furniture

The heat is on and the summer sunshine is upon us! Although we love this beautiful weather, the summer sun can be damaging to patio furniture. To avoid fading paint and other sun damage, here are some tips to protect your patio furniture from the weather:

1. Get a Patio Umbrella

Investing in a good umbrella is among the best tips to protect your patio furniture from the sun. One of the best features of a patio umbrella is its versatility. It can be moved from place to place or angled, depending on what needs to be protected from the summer sun.

2. Store your cushions and umbrella!

Cushions and umbrellas are easily damaged during storms when left outside. So if a storm is coming, take them inside or store them in a heavy-duty outdoor storage container. Umbrellas can get sun and wind damaged as well. So if you are not using your umbrella, make sure it’s secured in an umbrella base and covered with an umbrella cover or store it away inside.

3. Try a Pavilion

Pavilions are another great way to stay protected from the sun. Not only does it help hide you from the sun’s harmful rays, but it can also turn your outdoor space into a private oasis. When it comes to tips to protect your patio furniture, you can’t go wrong with a pavilion.

Pavilions are a fantastic way to provide large areas of shade. They’re large enough to cover a complete patio set and hide your summer picnic or family BBQ from the summer elements. A pavilion can transform your backyard space into a separate outdoor living area that provides ample shade for the whole family.

4. Cover your Furniture!

It’s the BEST way to keep your furniture dry and free from any debris or scratching during a storm. And make sure to find the right fit for your chairs, tables, and umbrellas. Measure your furniture before buying your furniture covers or if you’ve purchased with American Sale, remember your set name and we can help you find the proper fit for your seating group. We sell individual covers for pieces, but we also sell covers for chairs and tables together.

5. Powder coat it.

Powder coating your patio furniture is the equivalent of covering your skin in sunscreen. It creates a layer of protection between the metal item and the harsh UV rays, slowing the progression of the damage caused by the sun. Though it won’t last forever, powder coating can help your furniture resist fading and rust, giving it a great finish for longer than any other wet paint product.

6. Get a Tent

If a pavilion is too large for your outdoor space, consider a tent. Tents are a great way to provide a shaded area that can be placed over seats, a children’s sandbox or a kiddie pool to protect the little ones from the harmful rays the sun brings.

One amazing thing you can add to your tent (or your pavilion) are water misters. While sitting in your protected space you can get a cool-mist amongst the heat. If you’re looking for tips to protect your patio furniture, adding a mister will also make cleanup easier by spraying down your tables and chairs.

7. Trim Your Trees!

Large tree branches hovering over your patio furniture can pose a threat to damaging your set. It’s a good idea to make sure any tree branches that are overhanging your set are either trimmed or removed. Also, if you have an awning, make sure it’s closed or secured before a storm just to make sure your patio furniture doesn’t get damaged by it.

8. Weight your furniture!

Weighing down furniture with sandbags or weights can also be a good idea if the storm is going to be particularly strong. This depends on the weight of your furniture itself as well. If you have a sling, aluminum, resin or wicker patio furniture, weighing down your table and chairs is a GREAT idea. If you have a cast iron or aluminum set, you may not have to do this. Chairs should also be tucked in under the table and umbrellas should always be placed in a heavy umbrella base like below to keep it from blowing away.

9. Protective cleaner

When it comes to protecting furniture from the weather, umbrellas, and covers are the go-to resource. Do not forget that protective cleaners can go a long way in keeping your furniture safe during the times there is no cover. The sun moves all day, so chances are at some points throughout the day, your furniture will be exposed. Using a protective cleaner regularly prepares your furniture for any exposed time and keeps it safe from permanent damage.

Enjoy the Summer

However you choose to catch a break from the sun this summer, Cincinnati Pool & Patio has a plethora of options to best suit your space, budget, and outdoor decor. Make sure you have fun and stay protected this summer.

Contact us today with any questions you have today!

Hot Tub Safety: Things to Watch Out For

Hot Tub Cleaning

HOT TUB SAFETY

The comfort of a good soak in the hot tub can make the best of us throw caution to the wind. The reality is all bodies of water, even the ones as small as a spa, can be quite dangerous. If you own a hot tub or spa, you should practice hot tub safety.

Daunting as the task may seem, you can avoid accidents in your hot tub. Here are some tips for hot tub safety.

Spa check-ups

All machinery needs regular checkups to ensure things are in order and working smoothly. Your hot tub is no exception.

Set a weekly or monthly schedule, depending on the frequency of your use to make sure nothing is wrong. You should consult a professional to make sure the spa is in safe working conditions.

Installing a 24/7 pH monitor like pHin in your spa will let you know about chemical imbalances as soon as they occur. With the right pH, spa chemical balance, and regular cleaning, you can avoid harmful bacteria buildup in the hot tub.

Hot Tub Safety precautions

As the owner, it is your responsibility to educate everyone about safety measures.

Hot tub bathers are at serious risk for hot water-related injuries. It is crucial that the water temperature doesn’t exceed 104°F. It is also important to time your soaking period. The average soaking time is around 15-20 minutes and it shouldn’t be exceeded. Spending a prolonged amount of time can result in dizziness, fainting, and in extreme cases death.

Expecting Mothers

Pregnant women are at a higher risk of heat-related issues such as hyperthermia. Prolonged bathing times are to be especially avoided because excessive heat can harm the fetus. Soaking time should be no more than 10-15 minutes. If any discomfort is felt, pregnant women should get out of the tub immediately. The water temperature should be below 102°F.

Children

Children should not be allowed to enter the tub without adult supervision. Though, accidents can happen even when an adult is around.

Kids can get very excited at the opportunity to have a dip in the tub. Therefore, don’t let this excitement come in the way of precaution.

Beware of signs of overactivity like rosy cheeks. You might want to take your child out of the tub to let them cool down for a bit before entering the pool again.

Ensure that all bathers, especially kids, are hydrated. You can set a small snack bar of juices and fruits like watermelon for the kids so that they can enjoy the hot tub without dehydrating.

Some hazards to look out for

Hot tubs are a great way to enjoy an afternoon with your family. Though, a very common hazard is slipping inside the tub. Therefore, children and adults alike should not attempt to run in the hot tub. Accidents like spraining, bruising, and drowning can very easily occur.

Do not bring any sharp objects or toys in the hot tub. Small and sharp objects not only cause severe injuries to bathers, but they can also clog the spa’s jets and filters.

Handling electrical devices

We know you might be thinking it is absurd to even mention this because it’s common sense, but we’ll still say it: keep ALL corded electronic devices, naked wiring, and electrical appliances away from the spa.

It would also be a good idea to keep your mobile phones and gadgets away from the spa to avoid damaging them.

Spa cover

We cannot stress how important a spa cover is. It will help you keep out unwanted bathers, restrict kids from entering the tub without adult supervision, keep dirt and debris out of the pool water, and avoid contamination.

Apart from those benefits, a spa cover will also aid you in conserving electricity, thus reducing your bill greatly.

Don’t have a spa cover? Contact us today and we can walk you through our selection of hot-tub covers and hot tub safety accessories.

Cleaning Your Grill

Grill Cleaning

Cleaning Your Grill

Like any good relationship, you need to put some work into the one you have with your grill. It doesn’t matter if you’re dealing with a top-of-line model or a cheap knock-off, with proper maintenance, cleaning your grill bound to keep it working a long time.

Polish the Outside

If you have an enamel grill, you can just spray a paper towel with glass cleaner and wipe down the exterior. For a stainless steel grill, you should use a brush and polish made for steel. Then you can buff along the grain with a microfiber cloth.

CLEANING THE GRILL GRATE

After getting a fire going, the first order of business is cleaning the grill grate. The grill grate will see the most action and because of this—and the fact that food will come into direct contact with it—most of your cleaning attention should be focused here.

If you haven’t already, invest in a good grill brush with a long handle and firm bristles or scouring pad.

Soak and Scrub

Remove the grates and the metal plates underneath, and place everything in a bucket of hot, soapy water. After a few minutes in the bucket, give the grates and the plates a good scrubbing with the grill brush; dip and redip it in the soapy water as needed. Give the grates a rinse with the garden hose and set aside. Use the grill brush to scrub the inside of the hood with hot, soapy water (that stuff that looks like peeling paint is a harmless buildup of carbon), and use steel wool for hard-to-get nooks.

Remove and clean the drip pan, then toss it into the soaking bucket. Let sit, then scrub with the grill brush and rinse with the hose. Reassemble the grill (no need to dry anything), and reconnect the propane tank. If there’s a cabinet below, give it a good sweeping with a whisk broom, then wipe it out with a damp paper towel.

OILING THE GRATE

After cleaning the grate, the question is: “To oil, or not to oil.”

Oiling your grill grate helps prevent food from sticking when cooking. To do this, dip a wadded paper towel in a little oil and, using tongs, wipe the oil evenly over the grate. Be careful not to use too much oil, because that’s a sure-fire way to start a good flare-up—a little goes a long way here.

CLEANING YOUR GRILL

Cleaning the grill grate and the ash out is very important, the rest of the grill—not so much. About once a month take a rag and some cleaner to the outside of the grill to keep it looking nice and shiny. Like a good cast iron pan, grilling over and over seasons the inside of your grill.

Fire up the grill, cranking it high for 15 minutes to burn off any food residue. Use a stainless-steel grill brush to scrape anything loose off the grates. Then turn all the knobs off, disconnect the propane tank (or, if your grill is connected to your main gas line, turn off the gas line), and wait until the grill is cool to the touch.

Clean the burner

Make sure the propane tank is turned off. Remove the briquettes and cooking grates, and carefully detach the gas tubes and burner. Clean the tubes with warm, soapy water and dry them with a towel. Wipe the burner clean with a damp cloth.

If you have a gas grill, one part that often gets clogged is its burner tubes. Symptoms of dirty burners include reduced flame size. They may also burn with an orange color instead of the usual blue. Both indicate abnormally low temperatures and an underpowered grill.

Typically a gas grill has multiple burner tubes, though some may only have one. Use a nylon or steel wire brush to gently clean the small holes on the tubes. Be sure to brush from the center of the tube outward, moving sideways (not up and down). Otherwise, you may push debris into the tube or holes themselves instead of clearing them.

Burn Off The Grease

During grilling season, briquettes transfer heat to the cooking grates, leaving them coated with grease. Before firing up your grill, flip over the briquettes, close the lid, and heat the grill on high for 15 minutes.

Certain practices can help discourage deposits of dirt and grease from forming in the first place. One method is to grease the grates of your hot grill with a little cooking oil right before you start cooking. In the same vein, scrubbing grates with raw onion is another tactic you can try. If you do have a grill brush without bristles, it’s a good idea to scrape your hot grates both before and after grilling.

Wrap It Up

If you don’t have a grill cover or never use the one you do have, change your ways. It could reduce your monthly deep-cleans to once a season. Best are vented covers, which allow moisture to escape.

If you have any questions about grills or cleaning your grill then you should contact us here!

Summer Grilling Tips

grilling tips

One of our favorite things about summertime is summer barbecues and cookouts. We know not everyone is a grill master. That’s why we’ve assembled a list of our best grilling tips to ensure you can have fun and be safe during your summer cookouts.

Here are 14 of our grilling tips!

The Pool and Spa Warehouse’s Grilling Tips

Clean Your Grill

Start with a clean grill. Don’t let last night’s salmon skin impart a fishy-char flavor to tonight’s chicken breasts. Use a sturdy metal brush to clean the grates in between uses.

The Less Movement The Better

Don’t move the food around. In general, the fewer times you flip something, the better (once is ideal for most meats). If the meat is stuck to the grill, let it cook more — it will unstick itself when it’s ready for flipping.

Don’t Press Down

Don’t squeeze or flatten meats. Yes, I know that burst of sizzling flame that comes from squishing a burger with a spatula is tempting. But you know what is creating that flame burst? Fat. And you know what fat is? Juicy flavor. Don’t squish meat, because you will squeeze out the taste and moisture.

Keep Water Near

Keep a spray bottle handy for flare-ups. Flames are not your food’s friends — they will char it unpleasantly. Keep a spray bottle filled with water handy; this will allow you to dampen flare-ups without interfering with heat.

Check The Temp with a Thermometer

Buy a meat thermometer. Unless you are a very experienced cook, it is hard to tell meat’s temperature merely by touching it. (Although if you are interested, here’s how to do it: Touch the meat. If it’s soft like the flesh between your index finger and thumb, it’s rare. If it’s soft like your cheek, it’s medium-rare, and if it’s firm like your forehead it’s well-done.) More accurate for most of us: A quick check of temp from a thermometer. Your confidence in grilling will skyrocket with this one $10 purchase.

Use aluminum foil to trap heat.

Really hot grill bars equal great grill marks on your steaks. To concentrate the heat and keep it from escaping, lay a sheet of foil over the grill for 10 minutes. Peel the foil off just before cooking, scrunch it into a ball (it cools fast) and use it later to scrape any residue or ash from the bars.

Bring the Meat to Room Temperature

Avoid putting cold foods straight on the grill. Letting meat come to temperature on the counter for 30 minutes before grilling will help it cook more evenly. (If you are looking for a rare sear, however — like if you’re grilling tuna, for example — then chilled is the way to go!)

Season meat liberally.

One of the most important grilling tips. Big, thick steaks need a lot of seasoning, so be sure to cover them liberally with salt, pepper, and any rub before grilling. A good rule of thumb for home cooks is to salt the meat twice as much as you think is needed.

Under not over

Undercook foods, just slightly. Carryover cooking is a real thing — food continues to cook after it leaves the grill. You can expect food temperature to go up about five degrees after leaving the grill, so plan accordingly.

Don’t poke.

When checking for doneness, resist the urge to repeatedly poke, stab, or pierce your meat with a fork or prongs. The juices will escape, making the meat drier and less flavorful. Use a spatula or tongs to gently move and flip your food

Create heat zones.

On a kettle grill, bank up the coals in the center. Sear food in the middle, where heat is highest, then moves it to the outer edges of the grill to perfectly cook without burning. On a gas grill, leave one burner on high, another on medium.

Cook on the coals.

Lay sweet potatoes, onions, and even corn in the husk directly on the embers. Roast, turning with tongs until the skins are coal black. When you scrape off the burned skin, the vegetable inside will be super sweet and smoky.

Let It Rest

Rest all meat! Allow the meat to sit undisturbed (and unsliced!) for five to 15 minutes after cooking, as this will allow the juices to redistribute. The bigger the piece of meat, the longer the rest time. Resting meat is an important key to juicy results.

Don’t Over Char

Don’t over-char to cook through meat with bones. No one wants to eat meat covered in thick, black char. If you have thicker meats with bones, such as chicken thighs or legs, cook them on high heat to get a nice crust, and then move to lower, indirect heat on the grill. This will allow the meat to cook through more slowly without overcooking the outside. Or, consider par-cooking the chicken in an oven for 15 to 20 minutes before grilling. Also great to precook: ribs!

Have any questions about grills? Or need more grilling tips? Don’t hesitate to contact us here!

Hot Tub Care and Maintenance

hot tub care

Hot Tub Care and Maintenance

A hot tub is a great way to relax at home. But owning a hot tub is not all fun and games. Hot Tub Care and maintenance is a big responsibility if you don’t want your investment to go to waste.

Fortunately for you, caring for a hot tub isn’t a complicated task. Let’s get right into it!

Cleaning the filter

Depending on how often you use your hot tub, spa filters need to be cleaned every 5-6 weeks. You should replace the filter cartridge every year to maintain water quality.

To be able to clean the filter, you must be familiar with its parts. A spa filter has 3 main parts:

The media

The media is the main part of your filter. It’s responsible for filtering the water and is polyester. The complex weaving enables the media to capture most of the solid dirt and debris.

The internal structure

The core of a filter is what gives it resistance to the water flow. Many filters come with a dual-core to give the filter a longer life.

End caps

These are found at the pole ends of the filter cartridge and are used to attach the filter to the hot tub plumbing.

Now that you are acquainted with the filter parts, let’s move on to cleaning it. You can access the filter at different points, depending on where the manufacturer has placed the filter cavity. It could be accessed from inside the spa itself or found underneath the tub. If that’s the case, you would want to shut off the valve to prevent water from rushing out once the filter is accessed.

For a regular rinse, you can wash out the debris from the filter by positioning a jet of water over it (preferably a gardening hose) and let the stream of water do its magic.

For more infrequent cleanses, use a chemical filter cleaner. Spray the filter’s weaving with the chemical rinse and let it sit for a couple of minutes so that the chemical can work. Rinse the filter thoroughly so that all of the chemicals are washed out.

Many people use household cleaners to cleanse filters. Especially, do NOT use cleaners like dishwashing liquid or bleach. These can hurt your filter and throw off the balance of your hot-tub.

Hot Tub Care: Clean The Shell

You also need to be sure to clean your hot tub shell. Just having a nice and clean set of filters isn’t going to suffice.

The hot tub seats can start accumulating scum and grime, giving your spa a gross and unappealing feel. If you have the hot tub spa installed outdoors, this will happen more often as compared to indoors. Your shell needs to be cleaned about every three months.

Do NOT use household cleaners or start scrubbing the shell with abrasive cleaners like steel wool. Since you have already invested so much in the hot tub spa, it would be worthwhile to spend a couple of bucks on quality spa cleaners. A nonabrasive cleaner like an old rag or a soft sponge would be great if you really want to scrub the shell clean. In fact, specially designed mittens can be purchased to remove scum from bathtubs and hot tubs.

If you feel the hot tub care does not require scrubbing, you can vacuum it to remove solid debris difficult to sweep out. Most of all, small battery-powered vacuums are great for sucking out grit.

Lastly, if water drainage is not yet in order, you could attempt to remove floating debris with a skimmer net. It’s great for quick cleaning when you don’t have time to replace the water or perform a deep cleanse, though it is only a temporary solution and not a substitute for the cleaning methods described above.

Clean the spa cover

A spa cover is often neglected by hot-tub owners. A hot tub cover acts as a barrier between dirt and debris and the clean sparkling water in your tub. Therefore, it can also help you conserve energy by providing insulation and keeping heat in.

Covers help prevent accidents like accidentally falling into the tub or drowning. In fact, getting a cover with a lock is a good precaution to keep away unwanted visitors from taking a soak in the tub when you aren’t around.

Check out our spa covers!

First of all, you should remove your spa cover at least twice a week to air it out. If your cover is heavy or difficult to lift, use a spa cover lifter to remove it. Leave the cover lifted for a couple of hours so that all moisture evaporates and the cover cools down.

If your hot tub is outside, buy a spa cover cleaner. Use it to wipe off any debris and stains. To keep your spa cover looking brand new for as long as possible, chemicals like a cover conditioner are of great help. Therefore, they will maintain the luster of the cover for quite a long time.

If you need any help choosing the right chemicals or cover for your spa, don’t hesitate to contact Cincinnati Pool & Patio. We’re always here to help with your hot tub care.

Installing a Hot Tub: Everything You Need to Know

installing a hot-tub

Installing a Hot-Tub

Have you finally caved in and decided you need to be installing a hot tub for your home?

A hot tub is a great way to unwind after a long day of work, but this isn’t the only benefit of installing a hot tub in your home. Relaxation is the least of its merits. The therapeutic effects of a hot tub are vast, ranging from providing you physical relief through hydrotherapy to emotional and mental calmness.

So if you’re planning on installing a hot tub, smart decision! You won’t regret this investment.

Before you head out to shop for your hot tub, there are some things you need to think about. We’re going to discuss all of them in detail, in this article.

Know your tubs: hot tub vs. spa

The first thought that pops into mind is what type of tub to buy: a hot tub? A spa?

This train of thought is usually followed by the question, “What’s the difference between the two?”

It is true, the two share common uses. They’re all used for relaxation, massages, hydrotherapy, and entertainment. The warm, gurgling water provides a relaxing atmosphere to its users where they can let go of all the stress and worries.

The terms are used interchangeably quite often. So much so that people often mistake a spa and hot tub.

A hot tub is a small pool filled with heated water. A hot tub may or may not have jets installed for massaging bathers. Hot tubs can be equipped with features such as fancy lights, speakers, etc.

A spa on the other hand usually refers to a small pool made up of acrylic, concrete, etc that also has many accessories. The primary difference between a hot tub and spa is usually the construction material used. Hot tubs have been traditionally built from wood – though you may find hot tubs made from several other materials too – while spas are built using a variety of items such as acrylic, concrete, or fiberglass.

Approval to install a spa

The first thing you should do is find out if you are required to fulfill any legal formalities in your area before installing a hot tub. Laws vary from state to state so you might have to find out through the local municipal area.

Size

The next step is to determine the size of hot-tub you need How many family members do you have? What are you using the hot-tub for?
If you are buying it for medical purposes such as muscle and joint pain-alleviation, you probably will not have a lot of bathers in the tub at any one time. If you are buying it to relax, surrounded by your family, buy one big enough to accommodate your family.

Budget

For many people, the cost is the primary factor when buying a hot tub. Big or small, even the richest have a budget. Do the purchasing and installation costs fit in your budget? Can you afford the increased electricity bill?
When researching hot tubs many people stumble across hot tub DIYs. These are tempting and offer a cheap solution to buying one.

But…

DIYs for large projects like spas and hot tubs are not the best decision. There’s a reason why companies manufacture these units and provide installation help.

Don’t fall for the frugality trap and end up wasting money. Instead, you could check out the pool and spa warehouse for the perfect hot tub and get it installed at competitive prices. How’s that for saving money, eh?

Find the perfect location

The budget issue has been solved, now it’s time to move on to the next part: finding the right space for installation. There are a couple of options available to you. You could put it on your deck if there’s space or in the backyard over a concrete patio.

Before installing the unit on your deck, you must have it inspected by a professional to make sure it is sturdy enough to hold it.

For backyard installations, make sure you have a walkway leading up to the tub to avoid contaminating the water with dirt and debris.

Consult an electrician

You have the approval of installing a hot tub, you have enough space, the budget allows this investment, and we’re good to go, right? Not quite. There’s one last important step left. Have you consulted a licensed electrician yet?

Do you have a source of power near the designated place of the hot tub? Will the source be able to support powering the hot tub?

You can have all these questions answered by consulting licensed electrician instead of just winging it. Don’t forget to make sure he has a permit if you want the insurance company to pay for any troubles that arise.

Hot tub miscellaneous

You’re almost good to go. You just need to make sure of this final checklist before heading out hot tub shopping.

If you are installing a hot-tub indoors, is there sufficient ventilation? What about proper drainage?

If you have any questions about installing a hot tub, don’t hesitate in contacting us!

Patio Furniture Basics

patio furniture basics

Patio Furniture Basics

Patio furniture can turn your backyard into the perfect entertainment space, but maintaining that new look of outdoor furniture is difficult when facing the elements. Whether hauling out your tired and true patio furniture basics or shopping for new pieces to add to your backyard for any season, here are some ways to help keep your patio furniture looking new.

FURNITURE COVERS

Furniture covers are a great way to extend the life of any outdoor living set. Covers protect your furniture all day and night from sun or storm. The fear of fading will no longer be a problem with a furniture cover since it protects from the sun. Covers also come in a large variety of shapes and sizes to fit any backyard piece.

REGULAR CLEANING

By cleaning your furniture on a regular basis you are able to not only extend the life of your furniture but also keep it looking new. For the most part, basic cleaning for outdoor furniture can be soapy water, but any wicker pieces should be washed with water alone.

STORING PATIO FURNITURE BASICS

Winter can take a toll on patio furniture. The cold can cause furniture to crack and if it gets wet mold and mildew can be a major problem. Finding storage for your pieces during the winter can allow them to last many more seasons. If you are unable to find storage, use a furniture cover, but make sure it is waterproof to prevent mold and mildew build-up.

Using these steps will help keep your patio furniture looking spotless giving you a beautiful outdoor space to relax and entertain all summer.

Clean and comfortable patio furniture helps you create a relaxing spot for your family during warm weather. Preparing your patio furniture is fairly simple and is an easy way to refresh your outdoor living space.

Before you clean your patio furniture basics, assess it. Look for stains, mold or missing parts. Replace any lost foot caps or tighten loose screws. If a piece is too wobbly or damaged to be safely used, discard it and buy a replacement.

VINYL IS YOUR BEST FRIEND

Vinyl covers should be used during foul weather or the off-season. Water-resistant patio table covers with UV protection to help prevent fading are optimal when protecting your outdoor table. Covers that protect both chairs and tables are available, so check the size for what you might need.

HOW TO CLEAN YOUR PATIO FURNITURE

Depending on what type you have, you will have to use a different method to clean it.

Metal requires very little cleaning. You can simply spray with a bit of water or mild soap and you should see a clean surface.

Hardwood can last longer once you clean it with penetrating oil to help resist moisture.

Wicker is probably the most difficult material to clean: Spray it with a hose, and for more difficult cases, use a soft brush and mild soap to work out stubborn areas of moss or mildew.

Cushions, canvases, or vinyl covers also require cleaning — make sure you allow enough time for it to dry before storing.

If your outdoor furniture is in bad shape and needs to be replaced, contact us. We have a wide selection of many different types of pool and patio furniture by the finest manufacturers.

Need help preparing your patio furniture basics or looking for a new set? Contact us here!

Retaining Walls for Pool

retaining walls

Retaining Walls for Pool

Retaining walls are usually used for sloping backyards. Sometimes a wall is used to add more room by cutting into a small hillside. While other times its to allow perimeter space around the pool. Some homeowners incorporate a retaining wall into a water feature, such as wall spouts or rock waterfalls.

SLOPE

One of the biggest challenges that pool owners run into is the grade of their yard. Very rarely is someone’s backyard completely flat. If you have a sloped backyard, then you’ve probably considered incorporating a retaining wall into your design.

Sometimes with some extra gravel and some creative backfilling, we can get by without the extra expense of walls. Sometimes walls can add to the aesthetics of the pool when incorporated properly.

Determining when a wall is needed is the most important thing. This can become a disaster for the homeowner if the pool goes in and no wall was put in place to divert water. What this means is that the rainwater coming off the slope is going to end up in the pool carrying with it all the dirt and debris that comes along with a storm.

The slope is usually determined by how much dirt is left from the excavation of the pool. Sometimes the homeowner will have some extra fill dirt brought in to help feather the slope out.

RETAINING WALLS STYLE

There are two main styles of retaining walls, both with their method of construction. Masonry walls are built out of either poured concrete or concrete block and faced with stone.

Segmental retaining walls are constructed of dry stacking pre-cast concrete block together. Segmental block retaining walls are the most popular for several reasons, including being very attractive and more budget-friendly than masonry walls.

Sometimes when there is a slope in the yard that goes down to a level spot where the pool can go, it may be possible to put in a French drain to catch the water before it runs onto the patio. If you have to cut into the grade of the yard to put the pool in then this will probably not be an option for you.

LENGTH

One thing to keep in mind is that you do not sell yourself short on the length of the wall. When the wall is tapering down it is good to carry it a few feet longer then what is needed to ensure that water does not wash around the wall and onto the deck due to trying to save a couple of hundred dollars.

WALL FEATURES

When doing walls, you should try to make the wall more than just a wall. You can do an elevated patio which is always nice. Another option is to put the wall right on the pool itself with a cascade or two in it. It is always nice if the wall can be 20 fiberglass pool with retaining walls 24 inches so that the wall can be used to act as a sitting wall.

Not all walls are designed to keep the water from running onto the pool deck. Sometimes the wall is there to keep the pool in place. When dealing with these walls it is a little harder to incorporate them into the project to make it play a role in making the pool look better. A lot of times with the proper backfill and compaction a wall can be avoided in these situations.

Perhaps your property is level, but you want to add a dramatic backdrop to your pool with a raised wall on the far side. On top of the wall, you can add water features, a raised spa or additional pool deck spaces. Retaining walls can be topped with small bushes to add greenery and act as a barrier to blowing leaves. They can also serve a safety function by restricting access on one side of the pool.

There is usually extra cost in the gravel that is needed and the extra time in prepping the ground. But it can be much less expensive than the wall itself. The area would have to lend itself to enough area for grading the slope out so that it is not to steep.

COST

How much do retaining walls cost? This is a pretty broad question with a variety of answers depending on which options you choose. Retaining walls are typically priced by the square foot, so the length and height will directly influence how much you spend.

The cost of segmental walls is also determined by the size and shape of the block used. Walls with multiple sized blocks are typically more attractive.

Have any questions about retaining walls or the pool construction process? Contact us here!

The Benefits of Outdoor Kitchens

outdoor kitchens

The Benefits of Outdoor Kitchens

Have you considered getting an outdoor kitchen for your home? Outdoor kitchens can be a great addition to the right home.

We’re going to discuss all of the benefits that come with installing a kitchen in your backyard or patio arrangement.

Increased Home Value

Outdoor kitchens are generally thought to be a luxury item, that can make your house more marketable. Outdoor kitchens have a higher rate of return on your investment, like constructing a garage door in comparison. In case you don’t have a huge yard, make sure you take into account the dimensions of your kitchen. Prospective homebuyers enjoy having an open area which isn’t consumed by structures, like pools and kitchens.

More Living Room

If you don’t have a large gathering space inside your home, an outdoor kitchen is a great option for you. If you’re hosting a party, guests will be able to have more space to relax on the patio and lounge around the outdoor kitchen

Whenever your outdoor patios are coupled with an outside kitchen, food prep becomes sort of a group activity. Therefore, no one gets stuck inside cooking while everyone else is drinking on the patio.

Maintain The Smell of Cooking Outdoor

Another benefit of having an outdoor kitchen is you can keep the smells of grilling or charring foods outside. You won’t have to deal with the smokiness or worry about your house smelling like whatever you’re cooking in the summertime.

An outside kitchen retains cooking grease, odors, smoke, and heat outside–a big plus in sweltering summertime.

Save on Utilities

Cooking outside can also help you save money and energy on your bills. When you cook outside, your A.C. won’t have to work overtime to deal with the heat in your kitchen.

Design Factors of Outdoor Kitchens

When designing your outdoor kitchen, you’ll want to put a lot of time and thought into what exactly you want and need.

A great first place to start is thinking about the ventilation. You’ll want to create a way for smoke to rise and dissipate from the area.

Another priority you should think about first is the size of your patio and the measurements of the accessories. You’ll want to make sure you have enough space for the items, and for anyone on the patio to fully relax.

When planning your layout are some developments to consider:

All About The Grill:

First, you’ll have to think about the size of the grill you want. This solely depends on how many people you want to cook for, what you’re going to cook, and how often you’re going to use the grill. If you plan on hosting large parties and cooking for every guest, a bigger grill is more your style. Though if you just want to cook for your family, and medium to a smaller size will be fine.

You can also decide if you would like your grill to be connected to the ground, or if you would like to be able to freely move it around. This will also be dependent on the size of the grill you need.

Countertops:

When thinking about countertops, you need to think: “How much prep space do I need?”  If you plan on preparing a lot of recipes outside, you’ll want a lot of space. If you’re unsure, get a countertop that’s easy to change out or add to.

Constructed Cabinets:

Cabinets are a great convenience to have outside. With this addition, you won’t have to run in and out from your house to retrieve extra silverware or plating. You can also invest in cabinets that you can lock if you’re worried about theft.

Lighting:

Lighting is what separates the good, bad, and ugly outdoor kitchens. Proper lighting will ensure that you can use your outdoor kitchen at any time you want. Floor lighting, fairy lights, LED, and lamps are all great options.

Lighting can add ambiance and will ensure your guests will be able to see all the delicious food you cook them.

Sink:

Having an outdoor sink can be convenient for you and your guests. You can wash and rinse any outdoor plates right outside, or allow your guest easy access to water refills.

The only limitation you have to a sink is making sure you’re able to connect it to your water source.

Refrigerator:

Outdoor refrigerators are a great item to have that will completely separate your outdoor and indoor kitchens. You can store the ingredients you want to use outside there, and you can reduce the number of times you have to run back inside.

You can go with mini or full-size options, it all depends on your needs and wants.

Floors:

Your best option for flooring is to go with a material that will be able to stand the elements of being outdoors. Concrete, brick natural stone, and tile are great options that can look good and last.

If you have any questions about how to create your outdoor kitchen, don’t hesitate to contact us here.